How heavy can my pendant light be & for which ceiling is it suitable?

This is the maximum weight your pendant light can have for the corresponding ceiling type

First things first: almost every light from our s.luce brand is light enough to be mounted on almost all standard ceilings. Whether plasterboard (lightweight construction), wood or concrete. An average modern multiple pendant luminaire from the series s.luce Ring, Orb, Sphere, Fairy, Progress or Atom series weighs no more than 3-5 kg and is therefore well below the maximum load capacity.

• A ceiling fixture that is attached to a wooden ceiling should at least be fastened with the same screws that are intended for use in wood and withstand a load of at least 15 kg.
• A ceiling attachment that is fixed to a plasterboard ceiling should at least be made with screws and plugs that are intended for use in plasterboard and can withstand a load of at least 10 kg.
• It is important to ensure that the luminaire and the fixing are at least as heavy or heavier than the luminaire itself.
• Concrete: A luminaire that is fixed to a concrete ceiling should at least be made with screws and plugs that have been specially developed for use in concrete. Such a fixing should be able to support a load of at least 20 kg.

It is important to note that there may be local regulations that regulate the maximum load-bearing capacity of luminaires in certain buildings (hospitals etc.) or regions. It is recommended to contact a qualified electrician to ensure that the lamp is properly installed and connected to the existing power supply. The formula for suspension:

The number of wires and the cross-section in mm² give the maximum weight of the luminaire in kg.

2x0.75 = 2.2 kg

2x1 = 3.0 kg

3x0.75 = 3.4 kg

3x1 = 4.5 kg

Hold everywhere: s.luce multiple pendant light combinations

The pendant light combinations from s.luce hold almost everywhere. Thanks to lightweight multiple canopies and very light luminaire bodies, there is hardly any type of ceiling on which they cannot be mounted.

Whether wood, plaster or concrete, simple lamp installation is guaranteed.

If you have any questions, we can also support your electricians with the installation and provide information on all s.luce lamps and lights. So you are always 100% on the safe side!

Notes on installing your pendant light

If you want to install a new lamp or luminaire on your ceiling, there are a few important factors to consider, in particular the weight of the lamp and the type of ceiling.

The weight of the lamp is crucial as it determines the maximum load-bearing capacity of the fixture. A lightweight pendant light can easily be fixed to a plasterboard or wooden ceiling.

Whereas a heavier lamp may require special fixings or even a separate power supply. It is important to consider the maximum weight of the lamp that can be supported by the fixture and ensure that it is not exceeded.

The type of ceiling also plays an important role in fixing the lamp. Wooden ceilings usually require a greater quantity of screws and plugs than plasterboard ceilings to support the weight of the lamp.

It is recommended to use screws and plugs specifically designed for use in wood or plasterboard to ensure that the fixings hold properly.

If you have a heavier If you mount a lamp on a ceiling that does not have sufficient load-bearing capacity, this can lead to safety risks and may result in damage to the ceiling or even injury. It is therefore important to carefully consider the type of ceiling and the weight of the lamp to ensure that the fixture is secure and stable.

There are also other aspects that should be considered, such as the maximum load capacity of the power cable and the maximum power that can be handled by the luminaire and fixture. A qualified electrician can help you choose the right fixture and wiring and ensure that the installation is done properly.

In summary, it is important to consider the weight of the lamp and the type of ceiling when mounting luminaires and lamps to ensure that the fixture is secure.

Tips for installing pendant luminaires

To install a pendant light, please follow these steps:

You must ensure that the power is switched off by turning off the fuse box or turning off the main switch. To be on the safe side, check with a phase testerto make sure that the power is 100% off! Remove the old chandelier, if present.

A suitable ceiling fixture (we recommend a s.luce canopy for your pendant light) at the point where the pendant light is to be attached.

Connect the connecting cable of the pendant light to the power cable in the ceiling connection.

Carefully hang the pendant light from the ceiling fixture and tighten the screws to securely fasten it.

Insert the bulbs and switch on the light to make sure it is working.

Our tip: pendant lights for stairwells or galleries

A pendant light in the stairwell is a great way to illuminate the stairwell and create a stylish atmosphere at the same time

Here are some tips for choosing and using pendant lights:

• Choose a pendant light with enough brightness: to ensure that the stairwell is adequately lit, you should choose a fixture that emits a reasonable amount of light. A good guideline is a luminaire with an output of at least 60 watts.
• Place the pendant luminaire close to the stairs: To ensure that the stairs are sufficiently illuminated, you should hang the luminaire close to the stairs, as it is always best when the light comes from different directions in the stairwell. A pendant staircase light (gallery light), step lighting and a wall light create a great synergy. Indirect lighting, such as recessed step lighting or handrail lighting, can also provide a creative lighting solution.
• Choose a pendant luminaire that can be securely mounted: A pendant light in a stairwell needs to be securely mounted to ensure it doesn't fall and cause accidents. Make sure that the luminaire is compatible with the existing mounting options in the stairwell.
• Choose a design that matches the décor of the house: Choose a pendant light that goes well with the home's décor to create a harmonious atmosphere.

Energy-saving options: Nowadays, there are many energy-saving bulbs and light sources available that make both ecological and economical sense.

Protection class: If the stairwell has damp rooms or higher requirements for protection against moisture, it is recommended to choose a higher protection class.

Stylish pendant lights for your dining room or dining table

There are a few factors to consider when choosing a pendant light for your dining table. Here are the skapetze® tips:

• Size: The pendant light should be approximately the same width as the table and hang about 30 cm lower than the surface of the table.
• Luminosity: Choose a pendant light with sufficient luminosity to illuminate the entire table. A general rule is that the light should have at least 50 watts or 2,000 - 5,000 lumens.
• Style: Choose a pendant light that matches the style of your dining table and room.
• Customizability: It's helpful if the light is adjustable so you can adjust the brightness and direction of the light to suit the needs of your room.
• Safety: Pay attention to the safety of the light, especially if there are children or pets in the house.

It's also a good idea to look at a few models of different sizes, colors and styles in a retail store and try out the light in your home before you buy.